Bambu Lab X2D Combo

Description

Bambu Lab X2D Combo — dual-nozzle 3D printer with AMS 2 Pro

The Bambu Lab X2D is the next chapter after the X1C: an enclosed, high-temperature printer built around a dual-nozzle system, a 65 °C actively heated chamber and a closed-loop servo extruder. This Combo pairs it with the AMS 2 Pro for multi-color and multi-material printing straight out of the box.

Dual-nozzle system: clean supports, faster color changes

The main nozzle prints the part while the auxiliary nozzle handles support material from its own filament. Steep overhangs, fabric folds and internal channels can be fully supported, then peeled away cleanly. The two nozzles swap in a split second, so color changes are faster, transitions cleaner and purge waste much lower.

More colors, more materials

Print in up to 25 colors, or fuse rigid and flexible materials in a single model: PLA with TPU for grips, bumpers, bags and more, straight off the bed and ready to use.

Finer, sharper, true to the design

A lighter toolhead means less inertia and less vibration, so surfaces stay clean even at full speed. The nozzle change uses a gear-and-trigger mechanism built into the toolhead: the change lever taps a trigger arm that drives an internal gear train, with no extra motor and no extra weight.

Servo extruder with adaptive calibration

The PMSM servo system samples resistance and position at 20 kHz and adjusts torque in real time, smoothing out the micro-fluctuations that show up as fine lines on the surface. Flow Dynamics Calibration models the whole extrusion system, so nozzle wear, residue or slightly damp filament are detected and compensated automatically.

Dual-intake cooling

Cool air flushes the chamber from the left and right intakes, setting each freshly extruded layer before it can droop. Overhangs and bridges stay clean, especially on low-temperature filaments like PLA.

300 °C nozzle and 65 °C active chamber heating

Hot enough for engineering filaments such as ABS, ASA and nylon. The active chamber distributes heat evenly, so layers bond strongly from edge to edge and large technical parts come out strong and flat.

Full filament-path AI detection

Live view and toolhead cameras, filament tangle detection and AI monitoring for spaghetti and nozzle clumping act as a built-in backup, so long prints can run with confidence.

Clean air, designed for everyday spaces

A filtration system with an activated carbon layer reduces odors and airborne particles, the same trusted approach used in the H Series, in a quiet, noise-optimized design.

Key specifications

Build volume	256 × 256 × 260 mm
Nozzles	Dual nozzle (main + auxiliary), up to 300 °C
Chamber	Actively heated, up to 65 °C
Extruder	Closed-loop servo (PMSM) on the main nozzle
Multi-color	Up to 25 colors
Included in this Combo	Bambu Lab X2D printer + AMS 2 Pro (EU version)

Source: Bambu Lab official X2D product page. The auxiliary nozzle gives its best results with official Bambu Lab filaments. Filaments shown are not included.